Motosport Ratings and Reviews
Top Rated Product
MAGURA HYDRAULIC CLUTCH
Although the Magura Hydraulic Clutch kit is used by some of the best professional riders across the world, any rider who utilizes this technology will quickly realize what they have been missing on their motorcycle.The Magura Hydraulic Clutch kit reduces rider fatigue by easing the clutch pull by up to 20%.The no fading reliability of the Magura Hydraulic clutch kit means no more worrying about the inconsistency of cable clutches.The self-adjusting feature of the hydraulic clutch kit eliminates the need to constantly re-adjust.Magura made installation easy and packaged the hydraulic clutch kit ready to install.
Average Customer Rating:
Rating Snapshot (42 reviews)
5 stars
31
4 stars
8
3 stars
1
2 stars
2
1 star
0
40 of 42(95%)customers would recommend this product to a friend.
Customer Reviews for MAGURA HYDRAULIC CLUTCH
Review 1 for MAGURA HYDRAULIC CLUTCH
Overall:
dirtbikerkx250f
Verified Purchaser:No
January 12, 2012
"Made the clutch so much easier to pull. Also made it grab harder because I think the cable clutch was not adjusted right and with this their is no need for adjustment !"
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 2 for MAGURA HYDRAULIC CLUTCH
Overall:
wisecopp
Location:Pierpont, OH
Can't go without it.
September 19, 2011
"I installed this on my 05 YZ250 and it is beautiful. The pull feels like when you have a brand new perch with a brand new lever, freshly greased, with a brand new cable. But, it feels like that every time you ride and you never have to adjust it. The weight of the whole assembly including lever is equal to the weight of your stock cable alone. Came with the carbon line. No fitment issues. If you have the money, buy it."
1 of 1 people found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 3 for MAGURA HYDRAULIC CLUTCH
Overall:
MX938
Location:Chesapeake, OH
Best upgrade yet!
June 26, 2011
"I had never really thought about getting a hydraulic clutch until I recently raced a GP. I ordered one the next week and wow what a difference it makes!! Will never go back to cable system again."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 4 for MAGURA HYDRAULIC CLUTCH
Overall:
chorchie
Location:pgh, PA
great product
April 3, 2011
"installed on hopped up banshee. Took off both carbs to get proper spacing on the pull , works great. For those not familar this comes stock on all KTM's"
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 5 for MAGURA HYDRAULIC CLUTCH
Overall:
Ldogg
Location:ohio
works great!!
May 15, 2010
"I wish the master cylinder was designed more like a front brake master cylinder(connection to the line banjo bolt style) instead of straight out . It's nearly impossible to mount up with barkbusters. I lowsided on the left side and my barkbuster spun and broke the braided steel line.My point is that in 25+years on riding I have never broken a brakeline off! It works great but needs some tweeking at the manufacturing level. Riding back to the truck with no clutch sucks."
1 of 2 people found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 6 for MAGURA HYDRAULIC CLUTCH
Overall:
dozer
Location:new york
awesome
April 22, 2010
"i have the09 crf450 and and clutch pull and adjustment was a big prob now has the clutch pull of a 65 and real easy install comes pre blead just route and install def helped left hand arm pump"
2 of 2 people found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 7 for MAGURA HYDRAULIC CLUTCH
Overall:
Jake08crf450
Location:Glenpool, Ok
Great Product
April 7, 2010
"Should have done this a long time ago. Two thumbs up on this clutch. It self adjusts perfectly. Very easy to install. I can now use my clutch with one finger. 2008 Crf450r"
1 of 1 people found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 8 for MAGURA HYDRAULIC CLUTCH
Overall:
Pokey
Location:Desallemands Louisiana
excellent mod
March 26, 2010
"Installed on my 09 crf450 that is known for having a hard clutch pull. the pull is now just as easy as my 250. Took about 45 min to install and have running again. remove top radiator bolt, remove shrouds and raise tank to feed slave through, then ty-wrap the line to the intake boot. would buy again."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 9 for MAGURA HYDRAULIC CLUTCH
Overall:
KTM525CR250
Location:Mill Hall, PA
Excellent Product
March 23, 2010
"I use this on a 2005 CR250 Harescramble bike. Clutch pull is smooth and easy. It is a must have if your cable routing is less than ideal due to high bar mounts, etc. I have more than one full race season on it without problems. The slave cylinder does collect dirt and water, requiring the cap to be taken off and cleaned out after each race. Without cleaning the cylinder, it would probably get scored up and start leaking. The slave cylinder is right in front of the chain on a CR, so it might not fill up with crud as fast on other models."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 10 for MAGURA HYDRAULIC CLUTCH
Overall:
MotoX331
Location:Austin, TX
Excellent Product
March 17, 2010
"Excellent Product
I just recieved mine and got it installed on my '09 CRF450R. I purchased the Clutch, Steel Braided line, & bleed kit. I would definitely recommend getting the bleed kit! It comes with nice little hose and syringe for bleeding the system easily. Not sure what everyone else's issue was, but even with swapping out the stock line for the steel braided line (as per most people's recommendation) and bleeding the system, the install only took me about 1hr. I did have to zip tie the line to an oil hose to keep it off the exhaust header, but other than that, the install was easy. It is just a matter of time before all the bikes come stock with a Hydraulic Clutch. This by far blows away the stock cable clutch. The pull is amazing! It is so fluid and smooth. I can literally feather the clutch with 1 finger easily when needed. It feels absolutely effortless doing moto sessions @ the track. There is a reason Millsaps, Short and Canard are running works units on their 450's in 2010.."
I just recieved mine and got it installed on my '09 CRF450R. I purchased the Clutch, Steel Braided line, & bleed kit. I would definitely recommend getting the bleed kit! It comes with nice little hose and syringe for bleeding the system easily. Not sure what everyone else's issue was, but even with swapping out the stock line for the steel braided line (as per most people's recommendation) and bleeding the system, the install only took me about 1hr. I did have to zip tie the line to an oil hose to keep it off the exhaust header, but other than that, the install was easy. It is just a matter of time before all the bikes come stock with a Hydraulic Clutch. This by far blows away the stock cable clutch. The pull is amazing! It is so fluid and smooth. I can literally feather the clutch with 1 finger easily when needed. It feels absolutely effortless doing moto sessions @ the track. There is a reason Millsaps, Short and Canard are running works units on their 450's in 2010.."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 11 for MAGURA HYDRAULIC CLUTCH
Overall:
bc23
Location:Rocklin, CA
magura hydraulic clutch
March 11, 2010
"I wish I could buy this for everyone with a dirtbike, (except KTM's). AWESOME!!! Works great with the ASV lever for the Magura clutch"
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 12 for MAGURA HYDRAULIC CLUTCH
Overall:
chrisb0879
February 17, 2010
"It wasn't easy to install. A few mods you have to do. Nothing really lined up. If I had to do it again.... I wouldn't."
0 of 2 people found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 13 for MAGURA HYDRAULIC CLUTCH
Overall:
Kilo
Location:Wichita, Kansas
Cables bore me
November 26, 2009
""I would have given this 5 stars but the installation instructions are lacking in detail, making it a bit difficult to get it right.
I had Magura controls on my '00 GasGas EC300 and loved the hydraulics and throttle. Magura makes some great stuff.
I put this on my 03 drz 400S and had to open up the clutch actuator arm and stock cable mount at the crankcase, but once that was done -and the slightly longer stainless steel hose installed to replace the stock plastic...everything worked like a charm. I went with the SS to avoid a hose meltdown in the field.
Bleeding these is a trick once opened up so spring for the SS hose and bleeder kit at the same time -then follow the bleeder kit's instructions. They get it right.""
I had Magura controls on my '00 GasGas EC300 and loved the hydraulics and throttle. Magura makes some great stuff.
I put this on my 03 drz 400S and had to open up the clutch actuator arm and stock cable mount at the crankcase, but once that was done -and the slightly longer stainless steel hose installed to replace the stock plastic...everything worked like a charm. I went with the SS to avoid a hose meltdown in the field.
Bleeding these is a trick once opened up so spring for the SS hose and bleeder kit at the same time -then follow the bleeder kit's instructions. They get it right.""
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 14 for MAGURA HYDRAULIC CLUTCH
Overall:
Nichro
Location:Mays Landing, NJ
Not perfection
October 29, 2009
"I installed this clutch on my CRF450R9 and it took one jump to cause the line to touch my exhaust and burn through it. Yes, it was zip tied as far away as I possibly could get it too. Ended my day fast. I then bought the stainless line and 2000 degree temperature resistant wrap from an auto store and so far so good. Has good feel, and is lighter to pull. Nice how it self adjusts too. Time will tell whether I'll keep in on or not."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 15 for MAGURA HYDRAULIC CLUTCH
Overall:
boogie
Location:washougal, wa
easy day
October 12, 2009
"ok, in my opinion, this is the best thing since the "launch control" for those perfect starts.. its spendy, but when installed correctly [i took it to a shop] it works like a dream and its 100% consistant! i can literally pull it in with my pinky finger, first thing i tried haha."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 16 for MAGURA HYDRAULIC CLUTCH
Overall:
kx450f63
Location:Wheeling, WV
BEST CLUTCH CONTROL
August 19, 2009
"If you want to eliminate hand fatigue from using the clutch this is the product for you. This clutch control system is the easiest and smoothest I have ever felt. The only reason I didn't give it five stars is the slave cylinder bracket could use a little more attention to detail. As long as you are patient when mounting the slave cylinder and get the angle correct, this will be the best clutch control you have ever had."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 17 for MAGURA HYDRAULIC CLUTCH
Overall:
Quad242
Location:Memphis
Great but Not Perfect
June 29, 2009
"Installed on my TRX 400EX and installation was not bad. Included instruction are vague and not bike specific. 400ex comes with two extra spacers and no instructions as to were they are supposed to go. The line is very thin I would order the steal braided line with your order. My original line melted 6 miles into my first ride, the line was not long enough to not run away from the exhaust. Once this is fixed it is the best clutch one could have. Its worth the head ache of installation."
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 18 for MAGURA HYDRAULIC CLUTCH
Overall:
yamham
Location:poway, ca
June 16, 2009
"got this for a supermoto im building an its awesome. sooo easy to pull"
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 19 for MAGURA HYDRAULIC CLUTCH
Overall:
Greedy
Location:Knik, AK
Spoil youself!
June 7, 2009
"Soooooo Sick! You can literally shift with pinky finger! Money well spent!"
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 20 for MAGURA HYDRAULIC CLUTCH
Overall:
Barracuda163
Location:Western WA.
flaws
May 14, 2009
"even though the hyd. clutch works like a dream and is a must for someone with engine mods such as stiff clutch springs, one flaw is the perch setup. My first magura clutch setup I managed to bust the cast perch at the hinge pin and it ended my long weekend of riding early. :( On the other hand, fluid power is key to ease and functionability. For this reason I currently have a second unit on order for my built YZF."
Share this Review:
Thank you! You have successfully submitted a comment for this review.